Product category
Air cooled screw chiller

Cooling capacity: 100kW ~ 2000kW

Outlet water temperature: 7 ℃ ~ - 15 ℃

Ambient temperature range: 21 ℃ ~ 43 ℃

Product options

1. Brine evaporator

2. Stepless energy regulation

3. Total heat recovery / partial heat recovery

4. Water pump control

5. Special voltage

6. Remote communication interface

Product features

1. Adopt international famous brand twin-screw compressor, enjoy the characteristics of high efficiency, low noise, low wear and long service life.

2. Adopt 4-stage energy regulation or 0% - 100% segmentless automatic regulation.

3. Siemens PLC programmable controller, LCD touch screen, Chinese and English man-machine interface are adopted.

4. Complete fault protection: high and low pressure protection, exhaust protection, oil level protection, water flow protection, reverse missing item protection, freezing water protection, high cooling water protection, etc.

Product specifications

Refrigerant type: R22 / R407C

Maximum water pressure of evaporator: 1.0MPa

Evaporator: water side fouling coefficient 0.018m2 ·℃ / kw

Power supply system: 380V / 3phase / 50Hz

Allowable voltage fluctuation: ± 5%

Allowable frequency fluctuation: ± 2%

The unit adopts high efficiency heat exchanger and advanced, special shape structure design and system. The unit can be directly installed on the roof or other outdoor places with good ventilation conditions, and there is no need to set up another machine room, which can save building space. The appearance of the unit is exquisite and beautiful. The unit adopts "W" coil design, with high space utilization rate and small size, so as to adapt to outdoor harsh weather conditions and ensure good operation effect of the unit in the service life cycle.

Environmental friendly R407C, R134a or R410A refrigerant can be selected.

Due to technical improvement, the overall dimension is likely to be changed. The overall dimension is for reference only. Please get the installation dimension drawing at any time.